ElectricianMatch
Tool · Michigan

Does your electrical panel need an upgrade, or just a look?

Read the label on the panel, note the main breaker size, say what you have noticed and what you plan to add. You get a verdict, the Michigan permit and utility notes that go with it, and what to ask the electrician. It runs in your browser and asks for nothing. It cannot see inside your panel, and every rule it applies has a source behind it.

Written by the ElectricianMatch editorial teamLast reviewed Oct 19, 2026Runs in your browser. Collects nothing.
AmpsBrandFind these two on the panel label
The panel label with its amps and brand fields, the two things the check asks you to read and photograph.

Answer the questions

What does the label on the panel say?

The brand is usually on the inside of the door or on the cover. Photograph it and read it in daylight.

How big is the main breaker or main fuse?

The number in amps printed on the largest breaker or on the main switch.

What have you noticed?

Pick the most serious one.

Are you adding anything big?

Plans change what the panel has to carry.

Every possible result

The result above appears when scripts are on. Each result below is listed with the answers that lead to it, in the order the tool checks them.

Stop using that circuit and get an electrician to look

Chosen when: What have you noticed: A warm panel, a warm outlet or a burning smell

Consumers Energy's home safety page says to call an electrician if an outlet feels warm, fuses blow often or lights flicker. A warm panel or a burning smell is further along than that. Smoke, flames or a strong smell mean you leave the house and call 911 before anything else. Otherwise, switch off the circuit you suspect, leave it off, and ask for an emergency visit. Do not open the panel yourself.

Try first: Leave the suspect circuit off and keep people away from the panel.

Stop and call someone if: You see smoke, flames or sparks. Leave and call 911.

Emergency electrician · After a storm: a downed line, a torn-off mast, and who fixes which part

A 60-amp service: expect an upgrade conversation

Chosen when: How big is the main breaker or main fuse: 60 A

Consumers Energy says that if you have an older 60-amp service and meter socket and you are upgrading, you should install a new meter socket, and that a minimum of 100 amp service and socket are required. That is Consumers' rule for its territory; DTE has its own requirements and its Modify Service page says upgraded residential connections are installed underground at the customer's expense. Either way the work has a utility part and an electrical part. A permit reads as required, because the exemption list names only small jobs such as replacing receptacles and switches, and the enforcing agency must approve the service equipment before the utility energizes it; your city's electrical office can confirm.

Try first: Photograph the closed panel with the label readable, and write down which utility sends your bill.

Stop and call someone if: A breaker or outlet is warm. Use the first verdict instead.

Panel upgrade · What goes into the price of a panel upgrade in Michigan

Have an electrician look at the panel

Chosen when: What have you noticed: Breakers trip or fuses blow often · or · What have you noticed: Lights flicker when something big starts

Consumers Energy tells its customers to call an electrician about breakers that trip often, fuses that blow often and lights that flicker when something big starts. None of that proves the panel needs replacing, since the cause may be one circuit, a loose connection or the load. Ask for a written finding that names the cause, with a yes or no on an upgrade and the reason for it.

Try first: Reset a tripped breaker once, then write down which one it was and what was running.

Stop and call someone if: The breaker will not stay on, or anything is warm or smells of burning.

Emergency electrician · Signs your Michigan home may need an electrical panel upgrade

Before you add a big load, ask for a load calculation

Chosen when: Are you adding anything big: An EV charger · or · Are you adding anything big: A heat pump, an addition or another large new load

The Department of Energy's charging page says EV charging is a continuous load under the National Electrical Code, and Michigan has used the 2023 edition since March 12, 2024. Whether your panel has room for a charger, a heat pump or an addition is a calculation the electrician does under that code. The calculation belongs to the electrician, so this tool does not attempt it. The EV charger planner does a simple subtraction from numbers you give it and states that it is not a code calculation.

Try first: Look up the nameplate amps of your range, dryer, water heater and air conditioner.

Stop and call someone if: Anyone suggests skipping the permit. A new circuit is an addition.

EV charger · Putting a Level 2 charger in a Michigan home: the circuit, the permit and the rebate status

Show that label to an electrician

Chosen when: What does the label on the panel say: Federal Pacific or Zinsco

We found no Michigan or federal primary source that rates panel brands, so we will not tell you what a name on a label means. Instead, send the company a photo of the label when it calls and ask the electrician to say in writing whether they would replace the panel and why. A replacement should come with the permit and the inspection written into the quote.

Try first: Photograph the label and the whole panel with the cover on.

Stop and call someone if: Anything is warm or smells of burning. Use the first verdict.

Panel upgrade · Signs your Michigan home may need an electrical panel upgrade

Fuses: ask the electrician whether to replace

Chosen when: What does the label on the panel say: Fuses, no breakers

Consumers Energy's advice is to call an electrician if fuses blow often, so that is the test to use, and the decision to replace a fuse panel is the electrician's to explain. Ask what the panel serves, whether any circuit is overloaded and whether they recommend a change, with the reasons on paper.

Try first: Note which fuse blows and what was running when it did.

Stop and call someone if: A fuse blows again right after you replace it. Stop and call.

Panel upgrade · Signs your Michigan home may need an electrical panel upgrade

Nothing you told us points to an upgrade

Chosen when: Any other answers

None of the signs we can source showed up in your answers: no warm panel, no repeated trips, no flicker, no 60-amp service and no big load planned. That is not a clean bill of health, since the tool cannot see the wiring. For a real answer, book an electrical inspection and keep the written findings.

Try first: Photograph the panel label and the breakers now, while nothing is wrong.

Stop and call someone if: Something changes. Run the check again.

Electrical inspection · Signs your Michigan home may need an electrical panel upgrade

Treat this as a list of what is worth asking about. Only an electrician looking at your panel can diagnose it. Figures shown are wages and permit fees, not prices; read how we estimate costs on the editorial policy page.

We are a referral service, not an electrical contractor. How we check what we publish.

Need an electrician? Get matched

Free to use. Three short steps: the job, the place, then how to reach you.

What do you need help with?
Something else · all 11 services

We check whether a company serves your ZIP before we ask for your phone number.

Free to use. The electrical company that receives your request pays us; you never do. How it works

Get matched